Renault Kadjar 1.6 DCI 130 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Kadjar 1.6 DCI 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Kadjar 1.6 DCI 130 hp ECU
Renault Kadjar (2015 - I) 1.6 DCI 130 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 130 to 150 hp (+20 hp, +15%) and torque from 320 to 360 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Dacia is Renault's mass-market budget sub-brand, built in Romania. Mid-generation diesel models use standard OBD read/write.
On mid-range Renault diesels, Stage 1 delivers a noticeable torque gain. On older-generation Renault models, Stage 1 is done via OBD without bench. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. The Renault community in Eastern Europe offers a large pool of Stage files for dCi engines. Mid-range Renault engines are a mainstream chip tuning subject in France.
Frequently asked questions
What power gain do you get after chip tuning the Renault Kadjar 1.6 DCI 130 hp?
Stage 1 for the Renault Kadjar 1.6 DCI 130 hp adds +20 hp — power increases from 130 to 150 hp (+15%). Torque rises from 320 to 360 Nm (+40 Nm).
What does a Stage 1 remap of the Renault Kadjar 1.6 DCI 130 hp include?
Stage 1 on the Renault Kadjar 1.6 DCI 130 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 DCI 130 hp?
Stage 1 on the Renault Kadjar 1.6 DCI 130 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Renault Kadjar 1.6 DCI 130 hp?
Stage 2 for the Renault Kadjar 1.6 DCI 130 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Renault Kadjar 1.6 DCI 130 hp have?
The Renault Kadjar 1.6 DCI 130 hp has 3 ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Renault Kadjar?
Stage 1 on the Renault Kadjar voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Renault Kadjar 1.6 DCI 130 hp done?
The full remap cycle for the Renault Kadjar — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Renault Kadjar?
The original Renault Kadjar ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Renault Kadjar 1.6 DCI 130 hp?
The cost of Stage 1 for the Renault Kadjar 1.6 DCI 130 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.