Renault Clio 1.5 DCI EU6 90 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Renault Clio 1.5 DCI EU6 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Renault Clio 1.5 DCI EU6 90 hp ECU
Renault Clio (2016 - IV (II)) 1.5 DCI EU6 90 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Франция, 1899). Stage 1 chip tuning raises power from 90 to 110 hp (+20 hp, +22%) and torque from 220 to 250 Nm (+30 Nm). This engine ships with different ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A diesel built in 2016 — the Tricore ECU era; OBD flash works on most production revisions.
Renault is the core of the Renault-Nissan-Mitsubishi Alliance (formed in 1999 and expanded in 2016). DPF/SCR with AdBlue is standard on Euro-6 Renault diesels.
On older-generation Renault models, Stage 1 is done via OBD without bench. The Renault community in France and Eastern Europe offers a large pool of ready-made Stage files. Within the Renault-Nissan Alliance, ECUs are partly standardised, so some files carry over between brands. On naturally aspirated Renault engines, the main effect is on throttle response. Low-output Renault engines are city-segment units; Stage 1 is safe.
Frequently asked questions
How much horsepower does Stage 1 add for the Renault Clio 1.5 DCI EU6 90 hp?
Stage 1 chip tuning on the Renault Clio 1.5 DCI EU6 90 hp boosts engine output by 20 hp: from 90 to 110 hp. Torque rises from 220 to 250 Nm (+30 Nm).
What changes in the Renault Clio ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Renault Clio with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Renault Clio?
Yes, Stage 1 on the low-output Renault Clio 1.5 DCI EU6 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Renault Clio 1.5 DCI EU6 90 hp?
Stage 2 for the Renault Clio 1.5 DCI EU6 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Renault Clio 1.5 DCI EU6 90 hp built with?
The Renault Clio 1.5 DCI EU6 90 hp comes with 3 ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID310. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Renault Clio remain valid after Stage 1?
After remapping the Renault Clio, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Renault Clio?
Reading and writing via OBD takes 25-30 minutes on the Renault Clio. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Renault Clio?
Before Stage 1 the original of the Renault Clio 1.5 DCI EU6 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Renault Clio 1.5 DCI EU6 90 hp cost?
The remap price for the Renault Clio 1.5 DCI EU6 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.