Peugeot Partner 1.6 HDI 112 hp — Stage 1 file (+23 hp)
hp
Stage 1 file for Peugeot Partner 1.6 HDI 112 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot Partner 1.6 HDI 112 hp ECU
Peugeot Partner (2008) 1.6 HDI 112 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 112 to 135 hp (+23 hp, +21%) and torque from 270 to 330 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. Diesel engines built in 2008 — the era of classic Common Rail without strong encryption.
The Peugeot range covers compacts, saloons, SUVs, crossovers and commercial vehicles. Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). Mid-range Citroen diesels are a mainstream chip tuning subject.
Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. On Peugeot diesels, Stage 1 delivers a noticeable torque gain. The Peugeot community in France offers a large pool of Stage files. The French Citroen community has a large pool of ready-made Stage files. Mid-range Citroen engines are a mainstream chip tuning subject in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Peugeot Partner 1.6 HDI 112 hp?
Stage 1 chip tuning on the Peugeot Partner 1.6 HDI 112 hp boosts engine output by 23 hp: from 112 to 135 hp. Torque rises from 270 to 330 Nm (+60 Nm).
What changes in the Peugeot Partner ECU after Stage 1?
Stage 1 on the Peugeot Partner 1.6 HDI 112 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +23 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 HDI 112 hp?
Stage 1 on the Peugeot Partner 1.6 HDI 112 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Peugeot Partner 1.6 HDI 112 hp?
Stage 2 for the Peugeot Partner 1.6 HDI 112 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Peugeot Partner 1.6 HDI 112 hp have?
The Peugeot Partner 1.6 HDI 112 hp has 2 ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Peugeot Partner?
Stage 1 on the Peugeot Partner voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot Partner 1.6 HDI 112 hp done?
The full remap cycle for the Peugeot Partner — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot Partner?
The original Peugeot Partner ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot Partner 1.6 HDI 112 hp?
The cost of Stage 1 for the Peugeot Partner 1.6 HDI 112 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.