Peugeot 508 1.6 HDI 112 hp — Stage 1 file (+23 hp)
hp
Stage 1 file for Peugeot 508 1.6 HDI 112 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 508 1.6 HDI 112 hp ECU
Peugeot 508 (2011) 1.6 HDI 112 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 112 to 135 hp (+23 hp, +21%) and torque from 270 to 330 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Peugeot Sport is the performance division that builds GTi models and track-focused variants. Within Stellantis, Peugeot shares platforms and engines with Citroen, Opel/Vauxhall and DS. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
The Peugeot community in France offers a large pool of Stage files. On Peugeot diesels, Stage 1 delivers a noticeable torque gain. On older-generation Peugeot models, Stage 1 is done via OBD without bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
What power gain do you get after chip tuning the Peugeot 508 1.6 HDI 112 hp?
After Stage 1 the power of the Peugeot 508 1.6 HDI 112 hp rises from 112 to 135 hp, a gain of 23 hp (+21%). Torque rises from 270 to 330 Nm (+60 Nm).
How does Stage 1 differ from stock on the Peugeot 508?
Stage 1 on the Peugeot 508 1.6 HDI 112 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +23 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 HDI 112 hp?
Stage 1 on the Peugeot 508 1.6 HDI 112 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Peugeot 508 1.6 HDI 112 hp?
Stage 2 on the Peugeot 508 1.6 HDI 112 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Peugeot 508 1.6 HDI 112 hp have?
The Peugeot 508 1.6 HDI 112 hp has 2 ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Peugeot 508?
Stage 1 on the Peugeot 508 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Peugeot 508 1.6 HDI 112 hp done?
The full remap cycle for the Peugeot 508 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Peugeot 508?
The original Peugeot 508 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Peugeot 508 1.6 HDI 112 hp?
The cost of Stage 1 for the Peugeot 508 1.6 HDI 112 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.