Peugeot 5008 1.6 HDI 112 hp — Stage 1 file (+23 hp)
hp
Stage 1 file for Peugeot 5008 1.6 HDI 112 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 5008 1.6 HDI 112 hp ECU
Peugeot 5008 (2009) 1.6 HDI 112 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 112 to 135 hp (+23 hp, +21%) and torque from 270 to 330 Nm (+60 Nm). This engine ships with different ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
On Peugeot diesels, Stage 1 delivers a noticeable torque gain. The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How much does the power of the Peugeot 5008 1.6 HDI 112 hp increase after Stage 1?
After Stage 1 the power of the Peugeot 5008 1.6 HDI 112 hp rises from 112 to 135 hp, a gain of 23 hp (+21%). Torque rises from 270 to 330 Nm (+60 Nm).
How does Stage 1 differ from stock on the Peugeot 5008?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 5008 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +23 hp with no hardware changes.
What is the risk of Stage 1 on the Peugeot 5008 1.6 HDI 112 hp?
A remap of the Peugeot 5008 1.6 HDI 112 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Peugeot 5008 1.6 HDI 112 hp?
Stage 2 on the Peugeot 5008 1.6 HDI 112 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot 5008 1.6 HDI 112 hp built with?
The Peugeot 5008 1.6 HDI 112 hp comes with 2 ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot 5008 remain valid after Stage 1?
After remapping the Peugeot 5008, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 5008?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 5008. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 5008?
Before Stage 1 the original of the Peugeot 5008 1.6 HDI 112 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 5008 1.6 HDI 112 hp cost?
The remap price for the Peugeot 5008 1.6 HDI 112 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.