Peugeot 1007 1.4 HDI 70 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Peugeot 1007 1.4 HDI 70 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Peugeot 1007 1.4 HDI 70 hp ECU
Peugeot 1007 (2005) 1.4 HDI 70 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Франция, 1810). Stage 1 chip tuning raises power from 70 to 85 hp (+15 hp, +21%) and torque from 160 to 200 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC17C10, Siemens/Continental SID804. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Peugeot is a French carmaker founded in 1810, the oldest automotive brand in France. Peugeot is part of the Stellantis group (formerly PSA). The Peugeot logo, a lion, has been the brand's traditional symbol since the 1850s. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
The Peugeot community in France offers a large pool of Stage files. Within Stellantis, ECUs are standardised, so Peugeot files often work on Citroen/Opel/DS. Low-output Citroen engines are city units, and Stage 1 is safe. On naturally aspirated Citroen engines, the main effect is on throttle response.
Frequently asked questions
What is the Stage 1 effect on the Peugeot 1007 1.4 HDI 70 hp?
After Stage 1 the power of the Peugeot 1007 1.4 HDI 70 hp rises from 70 to 85 hp, a gain of 15 hp (+21%). Torque rises from 160 to 200 Nm (+40 Nm).
How does Stage 1 differ from stock on the Peugeot 1007?
Stage 1 is a software optimization of the factory ECU firmware of the Peugeot 1007 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
Is Stage 1 worth doing on the base Peugeot 1007?
Stage 1 on the base Peugeot 1007 is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Peugeot 1007 1.4 HDI 70 hp?
Stage 2 on the Peugeot 1007 1.4 HDI 70 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Peugeot 1007 1.4 HDI 70 hp built with?
The Peugeot 1007 1.4 HDI 70 hp comes with 2 ECU variants: Bosch EDC17C10, Siemens/Continental SID804. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Peugeot 1007 remain valid after Stage 1?
After remapping the Peugeot 1007, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Peugeot 1007?
Reading and writing via OBD takes 25-30 minutes on the Peugeot 1007. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Peugeot 1007?
Before Stage 1 the original of the Peugeot 1007 1.4 HDI 70 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Peugeot 1007 1.4 HDI 70 hp cost?
The remap price for the Peugeot 1007 1.4 HDI 70 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.