Opel Movano 2.5 DCI 120 hp — Stage 1 file (+28 hp)
hp
Stage 1 file for Opel Movano 2.5 DCI 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Opel Movano 2.5 DCI 120 hp ECU
Opel Movano (2004) 2.5 DCI 120 hp — mass-market diesel engine of the passenger segment of the Stellantis group (Германия, 1862). Stage 1 chip tuning raises power from 120 to 148 hp (+28 hp, +23%) and torque from 300 to 368 Nm (+68 Nm). This engine ships with different ECU variants: Bosch EDC15C3, Bosch EDC16C36. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2004 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Opel and Vauxhall (UK) are the same line-up under different names. Opel OPC is the performance division, producing high-output turbo versions. Opel shares platforms with Peugeot, Citroen and DS within Stellantis since 2017. Citroen is a mainstream chip tuning subject among Western European taxi fleets.
The Opel community in Germany and the UK generates a large volume of Stage files. On Opel diesels, Stage 1 delivers a noticeable torque gain. Older Opel models (pre-2017) share ECUs with Chevrolet, requiring a different toolset. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the Opel Movano 2.5 DCI 120 hp reach after a remap?
After Stage 1 the power of the Opel Movano 2.5 DCI 120 hp rises from 120 to 148 hp, a gain of 28 hp (+23%). Torque rises from 300 to 368 Nm (+68 Nm).
How does Stage 1 differ from stock on the Opel Movano?
Stage 1 on the Opel Movano 2.5 DCI 120 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +28 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.5 DCI 120 hp?
Stage 1 on the Opel Movano 2.5 DCI 120 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Opel Movano 2.5 DCI 120 hp?
Stage 2 on the Opel Movano 2.5 DCI 120 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Opel Movano 2.5 DCI 120 hp have?
The Opel Movano 2.5 DCI 120 hp has 2 ECU variants: Bosch EDC15C3, Bosch EDC16C36. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Opel Movano?
Stage 1 on the Opel Movano voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Opel Movano 2.5 DCI 120 hp done?
The full remap cycle for the Opel Movano — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Opel Movano?
The original Opel Movano ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Opel Movano 2.5 DCI 120 hp?
The cost of Stage 1 for the Opel Movano 2.5 DCI 120 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.