Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm — Stage 1 file (+35 hp)
hp
Stage 1 file for Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm ECU
Mitsubishi Fuso Canter (I (1985+)) 3.0 DDi 175hp (129kW) 430Nm — commercial diesel engine of the commercial segment of the Daimler Truck (с 2003) group (Япония, 2003). Stage 1 chip tuning raises power from 175 to 210 hp (+35 hp, +20%) and torque from 430 to 496 Nm (+66 Nm).
Mitsubishi Fuso is a Japanese truck manufacturer, part of Daimler Truck since 2003. The Fuso Canter is a high-volume medium-duty truck in Japan and Asia. Truck chip tuning is a discipline of its own, focused on fuel consumption and pulling power rather than peak output. The factory calibration is conservative, leaving headroom for Stage 1 while preserving engine life. Mid-range diesels are a mainstream chip tuning subject in the commercial segment.
The professional logistics segment tunes for fuel consumption and pulling characteristics. Stage 1 on truck diesels focuses on torque for loaded running. The truck chip tuning community is an industry of its own, focused on long-haul routes. Mid-range MAN trucks are a mainstream chip tuning subject in logistics.
Frequently asked questions
How many horsepower does the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm reach after a remap?
The Stage 1 gain for the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm is 35 hp (+20%) over the stock 175 hp, for a total of 210 hp. Torque rises from 430 to 496 Nm (+66 Nm).
What is Stage 1 chip tuning for the Mitsubishi Fuso Canter?
Stage 1 chip tuning of the Mitsubishi Fuso Canter is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +35 hp with no hardware changes.
Can you do Stage 1 on the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm?
Yes, Stage 1 for the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Mitsubishi Fuso Canter?
Stage 2 on the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Mitsubishi Fuso Canter warranty after chip tuning?
The factory warranty of the Mitsubishi Fuso Canter does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mitsubishi Fuso Canter take?
On the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mitsubishi Fuso Canter?
Yes, the original ECU firmware of the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mitsubishi Fuso Canter?
Stage 1 for the Mitsubishi Fuso Canter 3.0 DDi 175hp (129kW) 430Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.