Mercedes Vito 110 CDI (2.1) 95 hp — Stage 1 file (+90 hp)
hp
Stage 1 file for Mercedes Vito 110 CDI (2.1) 95 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Vito 110 CDI (2.1) 95 hp ECU
Mercedes Vito (2010 - W639) 110 CDI (2.1) 95 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 95 to 185 hp (+90 hp, +95%) and torque from 250 to 360 Nm (+110 Nm). This engine ships with different ECU variants: Delphi CRD2, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A diesel built in 2010 — the Tricore ECU era; OBD flash works on most production revisions.
The Mercedes slogan is 'Das Beste oder nichts' ('The best or nothing'). Smart is Mercedes's city sub-brand, historically running Mitsubishi and Renault engines. Karl Benz is credited as the inventor of the automobile with the 1886 Patent-Motorwagen. Mercedes diesels have long been popular with the German police and taxi services. Mercedes diesel engines are fitted to passenger cars and commercial vehicles. BlueTEC is Mercedes's proprietary exhaust after-treatment system with an SCR catalyst and AdBlue.
In the Mercedes commercial segment, Stage 1 focuses on torque. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. On low-output Mercedes engines, Stage 1 is safe and does not over-stress the hardware. On naturally aspirated Mercedes engines without a turbo, the main effect is on throttle response. In the Mercedes city segment, Stage 1 is more about comfort and responsiveness than power.
Frequently asked questions
How much does the power of the Mercedes Vito 110 CDI (2.1) 95 hp increase after Stage 1?
Stage 1 chip tuning on the Mercedes Vito 110 CDI (2.1) 95 hp boosts engine output by 90 hp: from 95 to 185 hp. Torque rises from 250 to 360 Nm (+110 Nm).
What changes in the Mercedes Vito ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Vito with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +90 hp with no hardware changes.
Is Stage 1 worth doing on the base Mercedes Vito?
Yes, Stage 1 on the low-output Mercedes Vito 110 CDI (2.1) 95 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Mercedes Vito 110 CDI (2.1) 95 hp?
Stage 2 for the Mercedes Vito 110 CDI (2.1) 95 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Mercedes Vito 110 CDI (2.1) 95 hp built with?
The Mercedes Vito 110 CDI (2.1) 95 hp comes with 2 ECU variants: Delphi CRD2, Siemens/Continental VGSx-NAG2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes Vito remain valid after Stage 1?
After remapping the Mercedes Vito, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Vito?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Vito. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Vito?
Before Stage 1 the original of the Mercedes Vito 110 CDI (2.1) 95 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Vito 110 CDI (2.1) 95 hp cost?
The remap price for the Mercedes Vito 110 CDI (2.1) 95 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.