Mercedes Vito 114 (2.0) 136 hp — Stage 1 file (+129 hp)
hp
Stage 1 file for Mercedes Vito 114 (2.0) 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Vito 114 (2.0) 136 hp ECU
Mercedes Vito (2019 - W447-II) 114 (2.0) 136 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 136 to 265 hp (+129 hp, +95%) and torque from 330 to 550 Nm (+220 Nm). ECU — Bosch MD1CP001. Flashing method: OBD or Bench depending on the unit's protection. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. 4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. Mid-range Mercedes diesels are a mainstream chip tuning subject in both the commercial and passenger-car segments. The factory calibration on Mercedes diesels is conservative, leaving headroom for Stage 1 while preserving engine life. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels.
Stage 1 on mid-range Mercedes diesels delivers a noticeable torque gain. The Mercedes factory calibration allows a confident move to Stage 1 without hardware changes. The Mercedes community is active in Europe, with a large pool of available Stage files. Mid-range Mercedes engines are a premium segment with a conservative factory calibration, and Stage 1 preserves engine life. Mercedes prioritises smooth running, and Stage 1 preserves the engine's character.
Frequently asked questions
How many horsepower does the Mercedes Vito 114 (2.0) 136 hp reach after a remap?
The Stage 1 gain for the Mercedes Vito 114 (2.0) 136 hp is 129 hp (+95%) over the stock 136 hp, for a total of 265 hp. Torque rises from 330 to 550 Nm (+220 Nm).
What is Stage 1 chip tuning for the Mercedes Vito?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Vito with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +129 hp with no hardware changes.
What is the risk of Stage 1 on the Mercedes Vito 114 (2.0) 136 hp?
A remap of the Mercedes Vito 114 (2.0) 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mercedes Vito 114 (2.0) 136 hp?
Stage 2 on the Mercedes Vito 114 (2.0) 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Mercedes Vito 114 (2.0) 136 hp use?
The Mercedes Vito 114 (2.0) 136 hp is fitted with the Bosch MD1CP001 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Mercedes Vito remain valid after Stage 1?
After remapping the Mercedes Vito, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Vito?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Vito. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Vito?
Before Stage 1 the original of the Mercedes Vito 114 (2.0) 136 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Vito 114 (2.0) 136 hp cost?
The remap price for the Mercedes Vito 114 (2.0) 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.