Mercedes Vito 109 CDI (2.1) (2006) 88 hp — Stage 1 file (+42 hp)
hp
Stage 1 file for Mercedes Vito 109 CDI (2.1) (2006) 88 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Vito 109 CDI (2.1) (2006) 88 hp ECU
Mercedes Vito (2006 - W639) 109 CDI (2.1) (2006) 88 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 88 to 130 hp (+42 hp, +48%) and torque from 220 to 300 Nm (+80 Nm). This engine ships with different ECU variants: Bosch EDC15C0, Bosch EDC16C2, Bosch EDC16CP31. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. Maybach is Mercedes's ultra-luxury sub-brand. On older Mercedes diesels, Stage 1 is flashed over OBD with no complications. Mercedes diesels are known for smooth, quiet running, a hallmark of the premium segment. Mercedes diesels have long been known for legendary reliability, with German taxi fleets running to million-kilometre mileages.
In the Mercedes commercial segment, Stage 1 focuses on torque. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. On low-output Mercedes engines, Stage 1 is safe and does not over-stress the hardware. On naturally aspirated Mercedes engines without a turbo, the main effect is on throttle response. In the Mercedes city segment, Stage 1 is more about comfort and responsiveness than power.
Frequently asked questions
What is the Stage 1 effect on the Mercedes Vito 109 CDI (2.1) (2006) 88 hp?
Stage 1 for the Mercedes Vito 109 CDI (2.1) (2006) 88 hp adds +42 hp — power increases from 88 to 130 hp (+48%). Torque rises from 220 to 300 Nm (+80 Nm).
What does a Stage 1 remap of the Mercedes Vito 109 CDI (2.1) (2006) 88 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Vito with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +42 hp with no hardware changes.
Is Stage 1 worth doing on the base Mercedes Vito?
Yes, Stage 1 on the low-output Mercedes Vito 109 CDI (2.1) (2006) 88 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Mercedes Vito 109 CDI (2.1) (2006) 88 hp?
Stage 2 for the Mercedes Vito 109 CDI (2.1) (2006) 88 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Mercedes Vito 109 CDI (2.1) (2006) 88 hp built with?
The Mercedes Vito 109 CDI (2.1) (2006) 88 hp comes with 3 ECU variants: Bosch EDC15C0, Bosch EDC16C2, Bosch EDC16CP31. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes Vito remain valid after Stage 1?
After remapping the Mercedes Vito, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Vito?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Vito. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Vito?
Before Stage 1 the original of the Mercedes Vito 109 CDI (2.1) (2006) 88 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Vito 109 CDI (2.1) (2006) 88 hp cost?
The remap price for the Mercedes Vito 109 CDI (2.1) (2006) 88 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.