Mercedes C 63 AMG (6.2i) 457 hp — Stage 1 file (+53 hp)
hp
Stage 1 file for Mercedes C 63 AMG (6.2i) 457 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes C 63 AMG (6.2i) 457 hp ECU
Mercedes C (2010 - W204) 63 AMG (6.2i) 457 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 457 to 510 hp (+53 hp, +12%) and torque from 600 to 640 Nm (+40 Nm). This engine ships with different ECU variants: Bosch ME9.7, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.
The Mercedes slogan is 'Das Beste oder nichts' ('The best or nothing'). Smart is Mercedes's city sub-brand, historically running Mitsubishi and Renault engines. Karl Benz is credited as the inventor of the automobile with the 1886 Patent-Motorwagen. The AMG 'one engineer, one engine' principle means each engine is built by a single craftsman whose signature appears on the plaque. Maybach uses Mercedes engines for the ultra-luxury segment, with the emphasis on quietness and smoothness. AMG engines are a well-known base with plenty of headroom for Stage 2.
AMG engines confidently reach Stage 2 with a downpipe + intake. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects. Bench reading is a mandatory procedure for modern AMG models.
Frequently asked questions
How much does the power of the Mercedes C 63 AMG (6.2i) 457 hp increase after Stage 1?
Stage 1 for the Mercedes C 63 AMG (6.2i) 457 hp adds +53 hp — power increases from 457 to 510 hp (+12%). Torque rises from 600 to 640 Nm (+40 Nm).
What does a Stage 1 remap of the Mercedes C 63 AMG (6.2i) 457 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes C with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +53 hp with no hardware changes.
Does Stage 1 make sense on the Mercedes C 63 AMG (6.2i) 457 hp with this much power?
On the top-spec Mercedes C 63 AMG (6.2i) 457 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Mercedes C 63 AMG (6.2i) 457 hp?
Stage 2 for the Mercedes C 63 AMG (6.2i) 457 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Mercedes C 63 AMG (6.2i) 457 hp built with?
The Mercedes C 63 AMG (6.2i) 457 hp comes with 3 ECU variants: Bosch ME9.7, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes C remain valid after Stage 1?
After remapping the Mercedes C, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes C?
Reading and writing via OBD takes 25-30 minutes on the Mercedes C. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes C?
Before Stage 1 the original of the Mercedes C 63 AMG (6.2i) 457 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes C 63 AMG (6.2i) 457 hp cost?
The remap price for the Mercedes C 63 AMG (6.2i) 457 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.