Mercedes C 63 AMG S (4.0T) 510 hp — Stage 1 file (+90 hp)
hp
Stage 1 file for Mercedes C 63 AMG S (4.0T) 510 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes C 63 AMG S (4.0T) 510 hp ECU
Mercedes C (2014 - W205) 63 AMG S (4.0T) 510 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 510 to 600 hp (+90 hp, +18%) and torque from 700 to 850 Nm (+150 Nm). This engine ships with different ECU variants: Siemens/Continental CPC_NG, Delphi CPC2, Bosch MED17.7.5, Bosch VGS3-NAG3, Siemens/Continental VGS4-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 10 configurations · 5 ECU variants. A petrol engine built in 2014 — a Tricore platform without strong protection; OBD access works.
Maybach is Mercedes's ultra-luxury sub-brand. Mercedes-Benz is the world's oldest carmaker, founded in 1926 by the merger of Daimler-Motoren-Gesellschaft and Benz & Cie. The Mercedes slogan is 'Das Beste oder nichts' ('The best or nothing'). AMG is Mercedes's performance division (since 1967), acquired by Mercedes in 1999. The Mercedes petrol range spans compacts, premium saloons, SUVs, roadsters and AMG flagships. Brabus is an independent Mercedes tuning house specialising in top-model upgrades.
The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. Bench reading is a mandatory procedure for modern AMG models. Top AMG engines sit at the Mercedes power ceiling, and the gain is significant. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models.
Frequently asked questions
How many horsepower does the Mercedes C 63 AMG S (4.0T) 510 hp reach after a remap?
Stage 1 for the Mercedes C 63 AMG S (4.0T) 510 hp adds +90 hp — power increases from 510 to 600 hp (+18%). Torque rises from 700 to 850 Nm (+150 Nm).
What does a Stage 1 remap of the Mercedes C 63 AMG S (4.0T) 510 hp include?
Stage 1 on the Mercedes C 63 AMG S (4.0T) 510 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +90 hp with no hardware changes.
What does Stage 1 give on the top-spec Mercedes C 63 AMG S (4.0T) 510 hp?
On the top-spec Mercedes C 63 AMG S (4.0T) 510 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Mercedes C 63 AMG S (4.0T) 510 hp?
Stage 2 for the Mercedes C 63 AMG S (4.0T) 510 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Mercedes C 63 AMG S (4.0T) 510 hp have?
The Mercedes C 63 AMG S (4.0T) 510 hp has 5 ECU variants: Siemens/Continental CPC_NG, Delphi CPC2, Bosch MED17.7.5, Bosch VGS3-NAG3, Siemens/Continental VGS4-NAG2. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Mercedes C?
Stage 1 on the Mercedes C voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mercedes C 63 AMG S (4.0T) 510 hp done?
The full remap cycle for the Mercedes C — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mercedes C?
The original Mercedes C ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mercedes C 63 AMG S (4.0T) 510 hp?
The cost of Stage 1 for the Mercedes C 63 AMG S (4.0T) 510 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.