Mercedes C 320 CDI (3.0) 224 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Mercedes C 320 CDI (3.0) 224 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes C 320 CDI (3.0) 224 hp ECU
Mercedes C (2004 - W203) 320 CDI (3.0) 224 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 224 to 255 hp (+31 hp, +14%) and torque from 510 to 600 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC16C2, Bosch EDC16CP31, Bosch EDC17CP01, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. Diesel engines built in 2004 — the era of classic Common Rail without strong encryption.
Karl Benz is credited as the inventor of the automobile with the 1886 Patent-Motorwagen. The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. 4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. BlueTEC is Mercedes's proprietary exhaust after-treatment system with an SCR catalyst and AdBlue. High-output Mercedes diesels are premium-class with an emphasis on torque, and Stage 1 is especially felt in Nm. The factory calibration on Mercedes diesels is conservative, leaving headroom for Stage 1 while preserving engine life.
The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The Mercedes premium segment is a high-output platform with Stage 2 potential. High-output Mercedes engines are premium-class with solid headroom for Stage 1. On modern high-output Mercedes, Bench reading is often required because of the encryption.
Frequently asked questions
What power gain do you get after chip tuning the Mercedes C 320 CDI (3.0) 224 hp?
Stage 1 for the Mercedes C 320 CDI (3.0) 224 hp adds +31 hp — power increases from 224 to 255 hp (+14%). Torque rises from 510 to 600 Nm (+90 Nm).
What does a Stage 1 remap of the Mercedes C 320 CDI (3.0) 224 hp include?
Stage 1 on the Mercedes C 320 CDI (3.0) 224 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +31 hp with no hardware changes.
What does Stage 1 give on the powerful Mercedes C 320 CDI (3.0) 224 hp?
Stage 1 on the powerful Mercedes C 320 CDI (3.0) 224 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Mercedes C 320 CDI (3.0) 224 hp?
Stage 2 for the Mercedes C 320 CDI (3.0) 224 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Mercedes C 320 CDI (3.0) 224 hp have?
The Mercedes C 320 CDI (3.0) 224 hp has 4 ECU variants: Bosch EDC16C2, Bosch EDC16CP31, Bosch EDC17CP01, Siemens/Continental VGSx-NAG2. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Mercedes C?
Stage 1 on the Mercedes C voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mercedes C 320 CDI (3.0) 224 hp done?
The full remap cycle for the Mercedes C — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mercedes C?
The original Mercedes C ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mercedes C 320 CDI (3.0) 224 hp?
The cost of Stage 1 for the Mercedes C 320 CDI (3.0) 224 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.