Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm — Stage 1 file (+32 hp)
hp
Stage 1 file for Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm ECU
Massey Ferguson 8000 Series (I) 8737 SCR 370hp (272kW) 1600Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 370 to 402 hp (+32 hp, +9%) and torque from 1600 to 1796 Nm (+196 Nm).
Massey Ferguson is a high-volume tractor brand in Europe. Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Топ агро-дизели — мощностной потолок сегмента. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ Massey Ferguson — мощностной потолок агросегмента.
Frequently asked questions
What is the Stage 1 effect on the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm?
After Stage 1 the power of the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm rises from 370 to 402 hp, a gain of 32 hp (+9%). Torque rises from 1600 to 1796 Nm (+196 Nm).
How does Stage 1 differ from stock on the Massey Ferguson 8000 Series?
Stage 1 on the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +32 hp with no hardware changes.
What does Stage 1 give on the top-spec Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm?
Stage 1 for the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm?
Stage 2 on the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Massey Ferguson 8000 Series?
Stage 1 on the Massey Ferguson 8000 Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm done?
The full remap cycle for the Massey Ferguson 8000 Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Massey Ferguson 8000 Series?
The original Massey Ferguson 8000 Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm?
The cost of Stage 1 for the Massey Ferguson 8000 Series 8737 SCR 370hp (272kW) 1600Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.