Massey Ferguson — Stage 1 / Stage 2 parameters database

The CHIPOK database holds 80 engines for Massey Ferguson with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 5 models — from early generations to current platforms. Diesel engines only.

Choose a model

Models5

Engines80

ECU makersBosch / Continental / Denso / Siemens

File turnaround30–60 min

or choose step by step

Choose a vehicle type

Massey Ferguson models in the database (5)

Massey Ferguson 7000 Series

22 engines avg. +30 hp

→

7465 135hp (99kW) 585Nm·7465 CR 125hp (92kW) 585Nm·7475 140hp (103kW) 681Nm·7475 CR 146hp (107kW) 590Nm·7480 155hp (114kW) 590Nm·7480 CR 155hp (114kW) 590Nm more 16

Massey Ferguson 5000 Series

20 engines avg. +28 hp

→

5420 4.4 80hp (59kW) 346Nm·5430 4.4 90hp (66kW) 379Nm·5440 4.4 100hp (74kW) 402Nm·5440 CR 129hp (95kW) 420Nm·5450 4.4 105hp (77kW) 416Nm·5455 CR 105hp (77kW) 670Nm more 14

Massey Ferguson 6000 Series

18 engines avg. +30 hp

→

6445 CR 95hp (70kW) 400Nm·6455 CR 105hp (77kW) 463Nm·6460 CR 114hp (84kW) 538Nm·6460 CR 116hp (85kW) 471Nm·6465 131hp (96kW) 500Nm·6470 125hp (92kW) 492Nm more 12

Massey Ferguson 8000 Series

18 engines avg. +33 hp

→

8450 215hp (158kW) 864Nm·8450 CR 215hp (158kW) 970Nm·8460 235hp (173kW) 990Nm·8460 CR 235hp (173kW) 1071Nm·8470 260hp (191kW) 1195Nm·8470 CR 260hp (191kW) 1195Nm more 12

Massey Ferguson 9000 Series

2 engines avg. +51 hp

→

9695 8.4 30(224kW) 5hp·9795 8.4 30(263kW) 5hp

About Massey Ferguson chip tuning

Engines and platforms:

Main engines: AGCO Power 33 CWA (3.3L 3-cyl), 44 CWA (4.4L 4-cyl), 49 CWA (4.9L 4-cyl), 66 CWA (6.6L 6-cyl), 74 CWA (7.4L 6-cyl), 84 CWA (8.4L 6-cyl), Sisu 6.6 7.4 8.4
Platforms: 4700 (small 70-100hp), 5700 SL (90-130hp), 6700 (110-160hp), 7700 (140-260hp), 8700 (270-400hp), 9S (Dyna-VT premium), Ideal combines (joint AGCO)

Supported ECUs:

Manufacturers: Bosch / Continental / Denso / Siemens
Specific Massey Ferguson units in the database: AGCO Power SISU ECM (proprietary), Bosch EDC17CV41, EDC17CV44, EDC17CV45, EDC17CV56, AGCO Power Plus controller, Datatronic 5 monitor (display, not ECU)
Massey Ferguson specifics: AGCO-specific ECU — Dyna-VT CVT transmissions

Service terms:

Calibrations are done by hand in WinOLS5 + Ghidra for each specific control unit
Checksums are recalculated on the engineer's side — the file is ready to flash with a current programmer
File returned within 30-60 minutes during working hours
Free revisions based on an OBD log