Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm — Stage 1 file (+56 hp)
hp
Stage 1 file for Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm ECU
Massey Ferguson 8000 Series (I) 8660 CR AdBlue 295hp (199kW) 1295Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 270 to 326 hp (+56 hp, +21%) and torque from 1185 to 1450 Nm (+265 Nm).
Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Massey Ferguson is a high-volume tractor brand in Europe. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Massey Ferguson — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm?
The Stage 1 gain for the Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm is 56 hp (+21%) over the stock 270 hp, for a total of 326 hp. Torque rises from 1185 to 1450 Nm (+265 Nm).
What is Stage 1 chip tuning for the Massey Ferguson 8000 Series?
Stage 1 is a software optimization of the factory ECU firmware of the Massey Ferguson 8000 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +56 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Massey Ferguson 8000 Series?
The high-output Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm?
Stage 2 on the Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Massey Ferguson 8000 Series remain valid after Stage 1?
After remapping the Massey Ferguson 8000 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Massey Ferguson 8000 Series?
Reading and writing via OBD takes 25-30 minutes on the Massey Ferguson 8000 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Massey Ferguson 8000 Series?
Before Stage 1 the original of the Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm cost?
The remap price for the Massey Ferguson 8000 Series 8660 CR AdBlue 295hp (199kW) 1295Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.