Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm — Stage 1 file (+22 hp)
hp
Stage 1 file for Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm ECU
Massey Ferguson 8000 Series (I) 8460 235hp (173kW) 990Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 235 to 257 hp (+22 hp, +9%) and torque from 990 to 1136 Nm (+146 Nm).
Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Massey Ferguson is a high-volume tractor brand in Europe. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Massey Ferguson — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm?
Stage 1 chip tuning on the Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm boosts engine output by 22 hp: from 235 to 257 hp. Torque rises from 990 to 1136 Nm (+146 Nm).
What changes in the Massey Ferguson 8000 Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Massey Ferguson 8000 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Massey Ferguson 8000 Series?
Stage 1 on the powerful Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm?
Stage 2 for the Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Massey Ferguson 8000 Series remain valid after Stage 1?
After remapping the Massey Ferguson 8000 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Massey Ferguson 8000 Series?
Reading and writing via OBD takes 25-30 minutes on the Massey Ferguson 8000 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Massey Ferguson 8000 Series?
Before Stage 1 the original of the Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm cost?
The remap price for the Massey Ferguson 8000 Series 8460 235hp (173kW) 990Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.