Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm — Stage 1 file (+29 hp)
hp
Stage 1 file for Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm ECU
Massey Ferguson 7000 Series (I) 7626 SCR 255hp (188kW) 1145Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 255 to 284 hp (+29 hp, +11%) and torque from 1145 to 1284 Nm (+139 Nm).
Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Massey Ferguson is a high-volume tractor brand in Europe. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Massey Ferguson — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much does the power of the Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm increase after Stage 1?
Stage 1 chip tuning on the Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm boosts engine output by 29 hp: from 255 to 284 hp. Torque rises from 1145 to 1284 Nm (+139 Nm).
What changes in the Massey Ferguson 7000 Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Massey Ferguson 7000 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +29 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Massey Ferguson 7000 Series?
Stage 1 on the powerful Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm?
Stage 2 for the Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Massey Ferguson 7000 Series remain valid after Stage 1?
After remapping the Massey Ferguson 7000 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Massey Ferguson 7000 Series?
Reading and writing via OBD takes 25-30 minutes on the Massey Ferguson 7000 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Massey Ferguson 7000 Series?
Before Stage 1 the original of the Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm cost?
The remap price for the Massey Ferguson 7000 Series 7626 SCR 255hp (188kW) 1145Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.