Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm — Stage 1 file (+36 hp)
hp
Stage 1 file for Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm ECU
Massey Ferguson 7000 Series (I) 7620 SCR 200hp (147kW) 980Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 200 to 236 hp (+36 hp, +18%) and torque from 980 to 1104 Nm (+124 Nm).
Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Massey Ferguson is a high-volume tractor brand in Europe. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Massey Ferguson — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm reach after a remap?
The Stage 1 gain for the Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm is 36 hp (+18%) over the stock 200 hp, for a total of 236 hp. Torque rises from 980 to 1104 Nm (+124 Nm).
What is Stage 1 chip tuning for the Massey Ferguson 7000 Series?
Stage 1 is a software optimization of the factory ECU firmware of the Massey Ferguson 7000 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +36 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Massey Ferguson 7000 Series?
The high-output Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm?
Stage 2 on the Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Massey Ferguson 7000 Series remain valid after Stage 1?
After remapping the Massey Ferguson 7000 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Massey Ferguson 7000 Series?
Reading and writing via OBD takes 25-30 minutes on the Massey Ferguson 7000 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Massey Ferguson 7000 Series?
Before Stage 1 the original of the Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm cost?
The remap price for the Massey Ferguson 7000 Series 7620 SCR 200hp (147kW) 980Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.