Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm — Stage 1 file (+40 hp)
hp
Stage 1 file for Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm ECU
Massey Ferguson 6000 Series (I) 6497 CR SISU 200hp (147kW) 883Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 200 to 240 hp (+40 hp, +20%) and torque from 883 to 1043 Nm (+160 Nm).
Massey Ferguson is part of AGCO Corporation. Massey Ferguson is a high-volume tractor brand in Europe. Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Высокомощные Massey Ferguson — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm?
The Stage 1 gain for the Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm is 40 hp (+20%) over the stock 200 hp, for a total of 240 hp. Torque rises from 883 to 1043 Nm (+160 Nm).
What is Stage 1 chip tuning for the Massey Ferguson 6000 Series?
Stage 1 chip tuning of the Massey Ferguson 6000 Series is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +40 hp with no hardware changes.
Is Stage 1 safe on the high-output Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm?
The high-output Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Massey Ferguson 6000 Series?
Stage 2 on the Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Massey Ferguson 6000 Series warranty after chip tuning?
The factory warranty of the Massey Ferguson 6000 Series does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Massey Ferguson 6000 Series take?
On the Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Massey Ferguson 6000 Series?
Yes, the original ECU firmware of the Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Massey Ferguson 6000 Series?
Stage 1 for the Massey Ferguson 6000 Series 6497 CR SISU 200hp (147kW) 883Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.