Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm — Stage 1 file (+37 hp)
hp
Stage 1 file for Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm ECU
Massey Ferguson 6000 Series (I) 6490 170hp (125kW) 720Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 170 to 207 hp (+37 hp, +22%) and torque from 720 to 876 Nm (+156 Nm).
Massey Ferguson is a high-volume tractor brand in Europe. Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Massey Ferguson среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm?
After Stage 1 the power of the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm rises from 170 to 207 hp, a gain of 37 hp (+22%). Torque rises from 720 to 876 Nm (+156 Nm).
How does Stage 1 differ from stock on the Massey Ferguson 6000 Series?
Stage 1 on the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +37 hp with no hardware changes.
Is a Stage 1 remap safe for the 6490 170hp (125kW) 720Nm?
Stage 1 on the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm?
Stage 2 on the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Massey Ferguson 6000 Series?
Stage 1 on the Massey Ferguson 6000 Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm done?
The full remap cycle for the Massey Ferguson 6000 Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Massey Ferguson 6000 Series?
The original Massey Ferguson 6000 Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm?
The cost of Stage 1 for the Massey Ferguson 6000 Series 6490 170hp (125kW) 720Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.