Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm ECU
Massey Ferguson 6000 Series (I) 6470 125hp (92kW) 492Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 125 to 155 hp (+30 hp, +24%) and torque from 492 to 636 Nm (+144 Nm).
Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Massey Ferguson is a high-volume tractor brand in Europe. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Massey Ferguson среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm?
The Stage 1 gain for the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm is 30 hp (+24%) over the stock 125 hp, for a total of 155 hp. Torque rises from 492 to 636 Nm (+144 Nm).
What is Stage 1 chip tuning for the Massey Ferguson 6000 Series?
Stage 1 is a software optimization of the factory ECU firmware of the Massey Ferguson 6000 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm?
A remap of the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm?
Stage 2 on the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Massey Ferguson 6000 Series remain valid after Stage 1?
After remapping the Massey Ferguson 6000 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Massey Ferguson 6000 Series?
Reading and writing via OBD takes 25-30 minutes on the Massey Ferguson 6000 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Massey Ferguson 6000 Series?
Before Stage 1 the original of the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm cost?
The remap price for the Massey Ferguson 6000 Series 6470 125hp (92kW) 492Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.