Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm ECU
Massey Ferguson 5000 Series (ALL) 5713 S 4.4 130hp (96kW) 545Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 130 to 160 hp (+30 hp, +23%) and torque from 545 to 675 Nm (+130 Nm).
Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Massey Ferguson is a high-volume tractor brand in Europe. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Massey Ferguson среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm?
Stage 1 chip tuning on the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm boosts engine output by 30 hp: from 130 to 160 hp. Torque rises from 545 to 675 Nm (+130 Nm).
What changes in the Massey Ferguson 5000 Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Massey Ferguson 5000 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm?
A remap of the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm?
Stage 2 for the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Massey Ferguson 5000 Series remain valid after Stage 1?
After remapping the Massey Ferguson 5000 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Massey Ferguson 5000 Series?
Reading and writing via OBD takes 25-30 minutes on the Massey Ferguson 5000 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Massey Ferguson 5000 Series?
Before Stage 1 the original of the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm cost?
The remap price for the Massey Ferguson 5000 Series 5713 S 4.4 130hp (96kW) 545Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.