Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm — Stage 1 file (+38 hp)
hp
Stage 1 file for Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm ECU
Massey Ferguson 5000 Series (ALL) 5460 CR 124hp (91kW) 471Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Великобритания, 1953). Stage 1 chip tuning raises power from 124 to 162 hp (+38 hp, +31%) and torque from 471 to 590 Nm (+119 Nm).
Massey Ferguson is a high-volume tractor brand in Europe. Massey Ferguson is a British-Canadian agricultural machinery manufacturer, founded in 1953. Massey Ferguson is part of AGCO Corporation. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Massey Ferguson среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm reach after a remap?
The Stage 1 gain for the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm is 38 hp (+31%) over the stock 124 hp, for a total of 162 hp. Torque rises from 471 to 590 Nm (+119 Nm).
What is Stage 1 chip tuning for the Massey Ferguson 5000 Series?
Stage 1 on the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +38 hp with no hardware changes.
Is a Stage 1 remap safe for the 5460 CR 124hp (91kW) 471Nm?
Stage 1 on the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm?
Stage 2 on the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Massey Ferguson 5000 Series?
Stage 1 on the Massey Ferguson 5000 Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm done?
The full remap cycle for the Massey Ferguson 5000 Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Massey Ferguson 5000 Series?
The original Massey Ferguson 5000 Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm?
The cost of Stage 1 for the Massey Ferguson 5000 Series 5460 CR 124hp (91kW) 471Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.