Maserati Quattroporte 3.0 V6 350 hp — Stage 1 file (+60 hp)
hp
Stage 1 file for Maserati Quattroporte 3.0 V6 350 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Maserati Quattroporte 3.0 V6 350 hp ECU
Maserati Quattroporte (2013 - VI) 3.0 V6 350 hp — luxury petrol engine of the passenger segment of the Stellantis group (Италия, 1914). Stage 1 chip tuning raises power from 350 to 410 hp (+60 hp, +17%) and torque from 500 to 620 Nm (+120 Nm). This engine ships with different ECU variants: Bosch MED17.3.4, Bosch MED17.3.5. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
The Trident is Maserati's signature logo and a symbol of Modena. The Maserati range comprises the Quattroporte, Ghibli, Levante, GranTurismo and MC20. The Maserati MC20 is the brand's flagship supercar, powered by its own Nettuno engine. Maserati shared engines with Ferrari (naturally aspirated V8) until 2020. The factory Maserati calibration is sporty-premium; headroom for Stage 1 remains. Maserati's petrol range comprises premium turbo engines and naturally aspirated V8s.
With the right hardware, Maserati engines comfortably reach Stage 2. The Maserati community is a premium-luxury chip tuning niche. A Bench read is standard procedure on modern Maseratis. Top-tier Maserati engines sit at the power ceiling of the premium segment; the gain is significant.
The MC20 uses a dual-clutch automated gearbox. Top-tier Maserati models come with a reinforced ZF 8HP. Maserati uses the ZF 8HP — a premium 8-speed automatic.
Frequently asked questions
What power gain do you get after chip tuning the Maserati Quattroporte 3.0 V6 350 hp?
Stage 1 for the Maserati Quattroporte 3.0 V6 350 hp adds +60 hp — power increases from 350 to 410 hp (+17%). Torque rises from 500 to 620 Nm (+120 Nm).
What does a Stage 1 remap of the Maserati Quattroporte 3.0 V6 350 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Maserati Quattroporte with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +60 hp with no hardware changes.
Does Stage 1 make sense on the Maserati Quattroporte 3.0 V6 350 hp with this much power?
On the top-spec Maserati Quattroporte 3.0 V6 350 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Maserati Quattroporte 3.0 V6 350 hp?
Stage 2 for the Maserati Quattroporte 3.0 V6 350 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Maserati Quattroporte 3.0 V6 350 hp built with?
The Maserati Quattroporte 3.0 V6 350 hp comes with 2 ECU variants: Bosch MED17.3.4, Bosch MED17.3.5. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HP70 gearbox give on the Maserati Quattroporte 3.0 V6 350 hp?
The ZF 8HP70 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Maserati Quattroporte remain valid after Stage 1?
After remapping the Maserati Quattroporte, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Maserati Quattroporte?
Reading and writing via OBD takes 25-30 minutes on the Maserati Quattroporte. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Maserati Quattroporte?
Before Stage 1 the original of the Maserati Quattroporte 3.0 V6 350 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Maserati Quattroporte 3.0 V6 350 hp cost?
The remap price for the Maserati Quattroporte 3.0 V6 350 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.