Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp — Stage 1 file (+90 hp)
hp
Stage 1 file for Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp ECU
Maserati Quattroporte (2013 - VI) 3.8 V8 Bi-turbo (GTS) 530 hp — luxury petrol engine of the passenger segment of the Stellantis group (Италия, 1914). Stage 1 chip tuning raises power from 530 to 620 hp (+90 hp, +17%) and torque from 730 to 800 Nm (+70 Nm). This engine ships with different ECU variants: Bosch MED17.3.4, Bosch MED17.3.5. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Maserati range comprises the Quattroporte, Ghibli, Levante, GranTurismo and MC20. The Maserati MC20 is the brand's flagship supercar, powered by its own Nettuno engine. Maserati is an Italian premium-luxury manufacturer from Modena, founded in 1914. Maserati's petrol range comprises premium turbo engines and naturally aspirated V8s. The Maserati MC20 features the in-house-developed Nettuno engine. Top-tier Maserati engines have significant potential with a downpipe + intake.
The Maserati community is a premium-luxury chip tuning niche. With the right hardware, Maserati engines comfortably reach Stage 2. Top-tier Maserati engines sit at the power ceiling of the premium segment; the gain is significant. A Bench read is standard procedure on modern Maseratis.
Top-tier Maserati models come with a reinforced ZF 8HP. Maserati uses the ZF 8HP — a premium 8-speed automatic. The MC20 uses a dual-clutch automated gearbox.
Frequently asked questions
How much horsepower does Stage 1 add for the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp?
The Stage 1 gain for the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp is 90 hp (+17%) over the stock 530 hp, for a total of 620 hp. Torque rises from 730 to 800 Nm (+70 Nm).
What is Stage 1 chip tuning for the Maserati Quattroporte?
Stage 1 chip tuning of the Maserati Quattroporte is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +90 hp with no hardware changes.
What is the Stage 1 potential of the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp?
Stage 1 for the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Maserati Quattroporte?
Stage 2 on the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp?
The Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.3.4, Bosch MED17.3.5. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HP70 TCU calibrated together with Stage 1?
Yes, on the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp the ZF 8HP70 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Maserati Quattroporte warranty after chip tuning?
The factory warranty of the Maserati Quattroporte does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Maserati Quattroporte take?
On the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Maserati Quattroporte?
Yes, the original ECU firmware of the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Maserati Quattroporte?
Stage 1 for the Maserati Quattroporte 3.8 V8 Bi-turbo (GTS) 530 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.