Maserati Quattroporte 3.0 d 275 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Maserati Quattroporte 3.0 d 275 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Maserati Quattroporte 3.0 d 275 hp ECU
Maserati Quattroporte (2013 - VI) 3.0 d 275 hp — luxury diesel engine of the passenger segment of the Stellantis group (Италия, 1914). Stage 1 chip tuning raises power from 275 to 305 hp (+30 hp, +11%) and torque from 600 to 660 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C49, Bosch EDC17C79, Bosch EDC17CP11. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HP70 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Maserati range comprises the Quattroporte, Ghibli, Levante, GranTurismo and MC20. The Maserati MC20 is the brand's flagship supercar, powered by its own Nettuno engine. Maserati is an Italian premium-luxury manufacturer from Modena, founded in 1914. High-output Maserati diesels sit in the premium segment. Maserati historically offered diesel versions of the Levante and Ghibli (based on VM Motori units). DPF/SCR with AdBlue is standard on Maserati diesels.
The Maserati community is a premium-luxury chip tuning niche. High-output Maserati models sit in the premium segment, with solid headroom for Stage 1.
Maserati uses the ZF 8HP — a premium 8-speed automatic. The MC20 uses a dual-clutch automated gearbox.
Frequently asked questions
What power gain do you get after chip tuning the Maserati Quattroporte 3.0 d 275 hp?
After Stage 1 the power of the Maserati Quattroporte 3.0 d 275 hp rises from 275 to 305 hp, a gain of 30 hp (+11%). Torque rises from 600 to 660 Nm (+60 Nm).
How does Stage 1 differ from stock on the Maserati Quattroporte?
Stage 1 chip tuning of the Maserati Quattroporte is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Is Stage 1 safe on the high-output Maserati Quattroporte 3.0 d 275 hp?
The high-output Maserati Quattroporte 3.0 d 275 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Maserati Quattroporte?
Stage 2 on the Maserati Quattroporte 3.0 d 275 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Maserati Quattroporte 3.0 d 275 hp?
The Maserati Quattroporte 3.0 d 275 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C49, Bosch EDC17C79, Bosch EDC17CP11. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HP70 TCU calibrated together with Stage 1?
Yes, on the Maserati Quattroporte 3.0 d 275 hp the ZF 8HP70 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Maserati Quattroporte warranty after chip tuning?
The factory warranty of the Maserati Quattroporte does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Maserati Quattroporte take?
On the Maserati Quattroporte 3.0 d 275 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Maserati Quattroporte?
Yes, the original ECU firmware of the Maserati Quattroporte 3.0 d 275 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Maserati Quattroporte?
Stage 1 for the Maserati Quattroporte 3.0 d 275 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.