Maserati Quattroporte 4.7i V8 32v 430 hp — Stage 1 file (+17 hp)
hp
Stage 1 file for Maserati Quattroporte 4.7i V8 32v 430 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Maserati Quattroporte 4.7i V8 32v 430 hp ECU
Maserati Quattroporte (2004 - V) 4.7i V8 32v 430 hp — luxury petrol engine of the passenger segment of the Stellantis group (Италия, 1914). Stage 1 chip tuning raises power from 430 to 447 hp (+17 hp, +4%) and torque from 490 to 510 Nm (+20 Nm). ECU — Bosch ME7.3.2. Flashing method: OBD or Bench depending on the unit's protection. The 2004 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Maserati specialises in premium GT-class saloons, coupes and SUVs. The Trident is Maserati's signature logo and a symbol of Modena. The Maserati range comprises the Quattroporte, Ghibli, Levante, GranTurismo and MC20. The factory Maserati calibration is sporty-premium; headroom for Stage 1 remains. Maserati's petrol range comprises premium turbo engines and naturally aspirated V8s. The Maserati MC20 features the in-house-developed Nettuno engine.
The Maserati community is a premium-luxury chip tuning niche. With the right hardware, Maserati engines comfortably reach Stage 2. Top-tier Maserati engines sit at the power ceiling of the premium segment; the gain is significant. A Bench read is standard procedure on modern Maseratis.
Frequently asked questions
How many horsepower does the Maserati Quattroporte 4.7i V8 32v 430 hp reach after a remap?
After Stage 1 the power of the Maserati Quattroporte 4.7i V8 32v 430 hp rises from 430 to 447 hp, a gain of 17 hp (+4%). Torque rises from 490 to 510 Nm (+20 Nm).
How does Stage 1 differ from stock on the Maserati Quattroporte?
Stage 1 on the Maserati Quattroporte 4.7i V8 32v 430 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +17 hp with no hardware changes.
What does Stage 1 give on the top-spec Maserati Quattroporte 4.7i V8 32v 430 hp?
Stage 1 for the Maserati Quattroporte 4.7i V8 32v 430 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Maserati Quattroporte 4.7i V8 32v 430 hp?
Stage 2 on the Maserati Quattroporte 4.7i V8 32v 430 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Maserati Quattroporte 4.7i V8 32v 430 hp run?
The control unit of the Maserati Quattroporte 4.7i V8 32v 430 hp is the Bosch ME7.3.2. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Maserati Quattroporte?
Stage 1 on the Maserati Quattroporte voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Maserati Quattroporte 4.7i V8 32v 430 hp done?
The full remap cycle for the Maserati Quattroporte — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Maserati Quattroporte?
The original Maserati Quattroporte ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Maserati Quattroporte 4.7i V8 32v 430 hp?
The cost of Stage 1 for the Maserati Quattroporte 4.7i V8 32v 430 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.