MAN TGX TGX 320 320hp (235kW) 1600Nm — Stage 1 file (+45 hp)
hp
Stage 1 file for MAN TGX TGX 320 320hp (235kW) 1600Nm
Target +0 hp. Custom development for your engine.
Chip tuning for MAN TGX TGX 320 320hp (235kW) 1600Nm ECU
MAN TGX (I) TGX 320 320hp (235kW) 1600Nm — commercial diesel engine of the commercial segment of the TRATON Group (Volkswagen Truck & Bus) group (Германия, 1758). Stage 1 chip tuning raises power from 320 to 365 hp (+45 hp, +14%) and torque from 1600 to 1840 Nm (+240 Nm).
MAN specialises in heavy trucks and long-haul tractor units. MAN shares some engines and platforms with Scania within TRATON. MAN is part of the TRATON Group (the Volkswagen Truck & Bus division). High-output diesels head the truck segment, and Stage 1 is especially felt in Nm. Mid-generation truck models use standard OBD read/write. Truck diesels carry an extended set of maps for commercial load, with the focus on torque.
On high-output trucks, Stage 1 reduces fuel consumption under load. The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. High-output MAN units are long-haul tractors with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the MAN TGX TGX 320 320hp (235kW) 1600Nm increase after Stage 1?
After Stage 1 the power of the MAN TGX TGX 320 320hp (235kW) 1600Nm rises from 320 to 365 hp, a gain of 45 hp (+14%). Torque rises from 1600 to 1840 Nm (+240 Nm).
How does Stage 1 differ from stock on the MAN TGX?
Stage 1 is a software optimization of the factory ECU firmware of the MAN TGX with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +45 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the MAN TGX?
The high-output MAN TGX TGX 320 320hp (235kW) 1600Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the MAN TGX TGX 320 320hp (235kW) 1600Nm?
Stage 2 on the MAN TGX TGX 320 320hp (235kW) 1600Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the MAN TGX remain valid after Stage 1?
After remapping the MAN TGX, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the MAN TGX?
Reading and writing via OBD takes 25-30 minutes on the MAN TGX. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the MAN TGX?
Before Stage 1 the original of the MAN TGX TGX 320 320hp (235kW) 1600Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the MAN TGX TGX 320 320hp (235kW) 1600Nm cost?
The remap price for the MAN TGX TGX 320 320hp (235kW) 1600Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.