MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm — Stage 1 file (+78 hp)
hp
Stage 1 file for MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm
Target +0 hp. Custom development for your engine.
Chip tuning for MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm ECU
MAN TGX (I) D2066 10.5 (EU6) 400hp (294kW) 1900Nm — commercial diesel engine of the commercial segment of the TRATON Group (Volkswagen Truck & Bus) group (Германия, 1758). Stage 1 chip tuning raises power from 400 to 478 hp (+78 hp, +20%) and torque from 1900 to 2286 Nm (+386 Nm).
The TGS, TGX and TGM are MAN's main truck series. MAN is a German truck and bus manufacturer, founded in 1758. MAN specialises in heavy trucks and long-haul tractor units. The factory calibration is conservative, leaving headroom for Stage 1 while preserving engine life. Top diesels in long-haul tractors sit at the power ceiling, and Stage 2 requires hardware. Mid-generation truck models use standard OBD read/write.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How many horsepower does the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm reach after a remap?
Stage 1 for the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm adds +78 hp — power increases from 400 to 478 hp (+20%). Torque rises from 1900 to 2286 Nm (+386 Nm).
What does a Stage 1 remap of the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm include?
Stage 1 on the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +78 hp with no hardware changes.
What does Stage 1 give on the top-spec MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm?
On the top-spec MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm?
Stage 2 for the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the MAN TGX?
Stage 1 on the MAN TGX voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm done?
The full remap cycle for the MAN TGX — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the MAN TGX?
The original MAN TGX ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm?
The cost of Stage 1 for the MAN TGX D2066 10.5 (EU6) 400hp (294kW) 1900Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.