Land-Rover Rover 3.0 D300 MHEV 300 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Land-Rover Rover 3.0 D300 MHEV 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Rover 3.0 D300 MHEV 300 hp ECU
Land-Rover Rover (2022) 3.0 D300 MHEV 300 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 300 to 330 hp (+30 hp, +10%) and torque from 650 to 720 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC17CP55, Bosch MD1CP007. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 6 configurations · 3 ECU variants. A modern diesel built in 2022 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
The Defender is an off-roader with a legendary reputation for capability. Land Rover shares platforms and engines with Jaguar within JLR. Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. High-output Jaguar diesels power the top F-Pace, XF and XJ variants. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Ingenium Diesel is JLR's modern diesel range.
The Jaguar community is a premium chip tuning niche in the UK and Europe. Modern Jaguars use Tricore protection and often require a Bench read. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
How much horsepower does Stage 1 add for the Land-Rover Rover 3.0 D300 MHEV 300 hp?
The Stage 1 gain for the Land-Rover Rover 3.0 D300 MHEV 300 hp is 30 hp (+10%) over the stock 300 hp, for a total of 330 hp. Torque rises from 650 to 720 Nm (+70 Nm).
What is Stage 1 chip tuning for the Land-Rover Rover?
Stage 1 chip tuning of the Land-Rover Rover is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Is Stage 1 safe on the high-output Land-Rover Rover 3.0 D300 MHEV 300 hp?
The high-output Land-Rover Rover 3.0 D300 MHEV 300 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Land-Rover Rover?
Stage 2 on the Land-Rover Rover 3.0 D300 MHEV 300 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Land-Rover Rover 3.0 D300 MHEV 300 hp?
The Land-Rover Rover 3.0 D300 MHEV 300 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17CP55, Bosch MD1CP007. The write method (OBD, Bench, Boot) is determined when the unit is read.
Is the ZF 8HPxx TCU calibrated together with Stage 1?
Yes, on the Land-Rover Rover 3.0 D300 MHEV 300 hp the ZF 8HPxx TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Land-Rover Rover warranty after chip tuning?
The factory warranty of the Land-Rover Rover does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Land-Rover Rover take?
On the Land-Rover Rover 3.0 D300 MHEV 300 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Land-Rover Rover?
Yes, the original ECU firmware of the Land-Rover Rover 3.0 D300 MHEV 300 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Land-Rover Rover?
Stage 1 for the Land-Rover Rover 3.0 D300 MHEV 300 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.