Land-Rover Rover 5.0 V8 supercharged 565 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Land-Rover Rover 5.0 V8 supercharged 565 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Rover 5.0 V8 supercharged 565 hp ECU
Land-Rover Rover (2018) 5.0 V8 supercharged 565 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 565 to 580 hp (+15 hp, +3%) and torque from 720 to 730 Nm (+10 Nm). This engine ships with different ECU variants: Bosch MED17.8.31, Bosch MED17.8.32. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A modern petrol engine built in 2018 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Land Rover specialises in premium off-roaders — the Range Rover, Discovery and Defender. The Range Rover is the flagship of the premium SUV segment and an iconic model for the brand. The Defender is an off-roader with a legendary reputation for capability. The Jaguar V8 Supercharged is an iconic premium-segment engine. The supercharged Jaguar V8 has significant potential with hardware upgrades. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines.
Modern Jaguars use Tricore protection and often require a Bench read. The supercharged Jaguar V8 comfortably reaches Stage 2 with the right hardware. The Jaguar community is a premium chip tuning niche in the UK and Europe. The top Jaguar SVR engines (supercharged V8) mark the ceiling of British premium performance.
Jaguar uses the ZF 8HP, a premium 8-speed automatic. SVR models use a reinforced ZF 8HP.
Frequently asked questions
What power gain do you get after chip tuning the Land-Rover Rover 5.0 V8 supercharged 565 hp?
After Stage 1 the power of the Land-Rover Rover 5.0 V8 supercharged 565 hp rises from 565 to 580 hp, a gain of 15 hp (+3%). Torque rises from 720 to 730 Nm (+10 Nm).
How does Stage 1 differ from stock on the Land-Rover Rover?
Stage 1 on the Land-Rover Rover 5.0 V8 supercharged 565 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
What does Stage 1 give on the top-spec Land-Rover Rover 5.0 V8 supercharged 565 hp?
Stage 1 for the Land-Rover Rover 5.0 V8 supercharged 565 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Land-Rover Rover 5.0 V8 supercharged 565 hp?
Stage 2 on the Land-Rover Rover 5.0 V8 supercharged 565 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Land-Rover Rover 5.0 V8 supercharged 565 hp have?
The Land-Rover Rover 5.0 V8 supercharged 565 hp has 2 ECU variants: Bosch MED17.8.31, Bosch MED17.8.32. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does the ZF 8HPxx transmission need calibration after Stage 1 on the Land-Rover Rover?
Remapping the ZF 8HPxx gearbox is essential to fully unlock Stage 1 on the Land-Rover Rover 5.0 V8 supercharged 565 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Land-Rover Rover?
Stage 1 on the Land-Rover Rover voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Land-Rover Rover 5.0 V8 supercharged 565 hp done?
The full remap cycle for the Land-Rover Rover — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Land-Rover Rover?
The original Land-Rover Rover ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Land-Rover Rover 5.0 V8 supercharged 565 hp?
The cost of Stage 1 for the Land-Rover Rover 5.0 V8 supercharged 565 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.