Land-Rover Rover 3.0 TDV6 258 hp — Stage 1 file (+42 hp)
hp
Stage 1 file for Land-Rover Rover 3.0 TDV6 258 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Rover 3.0 TDV6 258 hp ECU
Land-Rover Rover (2012) 3.0 TDV6 258 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 258 to 300 hp (+42 hp, +16%) and torque from 600 to 700 Nm (+100 Nm). ECU — Bosch EDC17CP11. Flashing method: OBD or Bench depending on the unit's protection. The 2012 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. Land Rover is part of Tata Motors via Jaguar Land Rover (JLR). Land Rover specialises in premium off-roaders — the Range Rover, Discovery and Defender. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. High-output Jaguar diesels power the top F-Pace, XF and XJ variants. Ingenium Diesel is JLR's modern diesel range.
The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Land-Rover Rover 3.0 TDV6 258 hp?
The Stage 1 gain for the Land-Rover Rover 3.0 TDV6 258 hp is 42 hp (+16%) over the stock 258 hp, for a total of 300 hp. Torque rises from 600 to 700 Nm (+100 Nm).
What is Stage 1 chip tuning for the Land-Rover Rover?
Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Rover with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +42 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Land-Rover Rover?
The high-output Land-Rover Rover 3.0 TDV6 258 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Land-Rover Rover 3.0 TDV6 258 hp?
Stage 2 on the Land-Rover Rover 3.0 TDV6 258 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Land-Rover Rover 3.0 TDV6 258 hp use?
The Land-Rover Rover 3.0 TDV6 258 hp is fitted with the Bosch EDC17CP11 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Land-Rover Rover remain valid after Stage 1?
After remapping the Land-Rover Rover, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Land-Rover Rover?
Reading and writing via OBD takes 25-30 minutes on the Land-Rover Rover. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Land-Rover Rover?
Before Stage 1 the original of the Land-Rover Rover 3.0 TDV6 258 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Land-Rover Rover 3.0 TDV6 258 hp cost?
The remap price for the Land-Rover Rover 3.0 TDV6 258 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.