Land-Rover Rover 3.0 SDV6 256 hp — Stage 1 file (+44 hp)
hp
Stage 1 file for Land-Rover Rover 3.0 SDV6 256 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Land-Rover Rover 3.0 SDV6 256 hp ECU
Land-Rover Rover (2002) 3.0 SDV6 256 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 256 to 300 hp (+44 hp, +17%) and torque from 600 to 700 Nm (+100 Nm). ECU — Bosch EDC17CP11. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2002 — the era of classic Common Rail without strong encryption.
Land Rover shares platforms and engines with Jaguar within JLR. Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. Land Rover is part of Tata Motors via Jaguar Land Rover (JLR). Ingenium Diesel is JLR's modern diesel range. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. High-output Jaguar diesels power the top F-Pace, XF and XJ variants.
The Jaguar community is a premium chip tuning niche in the UK and Europe. High-output Jaguars — the F-Type and F-Pace SVR — offer solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Land-Rover Rover 3.0 SDV6 256 hp?
Stage 1 for the Land-Rover Rover 3.0 SDV6 256 hp adds +44 hp — power increases from 256 to 300 hp (+17%). Torque rises from 600 to 700 Nm (+100 Nm).
What does a Stage 1 remap of the Land-Rover Rover 3.0 SDV6 256 hp include?
Stage 1 on the Land-Rover Rover 3.0 SDV6 256 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +44 hp with no hardware changes.
What does Stage 1 give on the powerful Land-Rover Rover 3.0 SDV6 256 hp?
Stage 1 on the powerful Land-Rover Rover 3.0 SDV6 256 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Land-Rover Rover 3.0 SDV6 256 hp?
Stage 2 for the Land-Rover Rover 3.0 SDV6 256 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Land-Rover Rover 3.0 SDV6 256 hp run?
The control unit of the Land-Rover Rover 3.0 SDV6 256 hp is the Bosch EDC17CP11. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Land-Rover Rover?
Stage 1 on the Land-Rover Rover voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Land-Rover Rover 3.0 SDV6 256 hp done?
The full remap cycle for the Land-Rover Rover — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Land-Rover Rover?
The original Land-Rover Rover ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Land-Rover Rover 3.0 SDV6 256 hp?
The cost of Stage 1 for the Land-Rover Rover 3.0 SDV6 256 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.