Land-Rover Rover 2.5 TD 136 hp — Stage 1 file (+29 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Land-Rover Rover 2.5 TD 136 hp ECU

Land-Rover Rover (2002) 2.5 TD 136 hp — premium diesel engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 136 to 165 hp (+29 hp, +21%) and torque from 300 to 360 Nm (+60 Nm). The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Land Rover is a British manufacturer of premium off-roaders and SUVs, founded in 1948. Land Rover is part of Tata Motors via Jaguar Land Rover (JLR). Land Rover specialises in premium off-roaders — the Range Rover, Discovery and Defender. DPF/SCR with AdBlue is standard on Euro-6 Jaguar diesels. Mid-range Jaguar diesels sit in the premium segment. Ingenium Diesel is JLR's modern diesel range.

The Jaguar community is a premium chip tuning niche in the UK and Europe. Stage 1 on Jaguar diesels delivers a noticeable torque gain. Mid-range Jaguars are premium saloons with solid headroom for Stage 1.

Frequently asked questions

What is the Stage 1 effect on the Land-Rover Rover 2.5 TD 136 hp?

The Stage 1 gain for the Land-Rover Rover 2.5 TD 136 hp is 29 hp (+21%) over the stock 136 hp, for a total of 165 hp. Torque rises from 300 to 360 Nm (+60 Nm).

What is Stage 1 chip tuning for the Land-Rover Rover?

Stage 1 is a software optimization of the factory ECU firmware of the Land-Rover Rover with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +29 hp with no hardware changes.

What is the risk of Stage 1 on the Land-Rover Rover 2.5 TD 136 hp?

A remap of the Land-Rover Rover 2.5 TD 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.

What is Stage 2 for the Land-Rover Rover 2.5 TD 136 hp?

Stage 2 on the Land-Rover Rover 2.5 TD 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does the factory warranty of the Land-Rover Rover remain valid after Stage 1?

After remapping the Land-Rover Rover, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Land-Rover Rover?

Reading and writing via OBD takes 25-30 minutes on the Land-Rover Rover. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Land-Rover Rover?

Before Stage 1 the original of the Land-Rover Rover 2.5 TD 136 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Land-Rover Rover 2.5 TD 136 hp cost?

The remap price for the Land-Rover Rover 2.5 TD 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno