Lamborghini Urus 4.0 TFSI 650 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Lamborghini Urus 4.0 TFSI 650 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Lamborghini Urus 4.0 TFSI 650 hp ECU
Lamborghini Urus (2019) 4.0 TFSI 650 hp — luxury petrol engine of the passenger segment of the Volkswagen Group (VAG) через Audi group (Италия, 1963). Stage 1 chip tuning raises power from 650 to 700 hp (+50 hp, +8%) and torque from 850 to 1000 Nm (+150 Nm). ECU — Bosch MG1CS008. Flashing method: OBD or Bench depending on the unit's protection. The ZF AL552 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A 2019 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
The Lamborghini range comprises the Huracan, Aventador and Urus. The Lamborghini Urus is the first SUV in the range, sharing its platform with the Audi Q8 and Porsche Cayenne. The Lamborghini Huracan is a naturally aspirated supercar sharing its platform with the Audi R8. Lamborghini shares engines with Audi's top range within VAG. The factory Lamborghini calibration is sporty, yet there is still headroom for Stage 1. Top-tier Lamborghini engines have significant potential with a downpipe + intake.
Within the VAG group, Lamborghini shares ECUs with Audi. The Lamborghini community is an ultra-premium chip tuning segment. With the right hardware, Lamborghini engines comfortably reach Stage 2. A Bench read is standard procedure on modern Lamborghinis. Top-tier Lamborghini engines sit at the power ceiling of the supercar segment.
The Urus uses the ZF 8HP, a premium 8-speed automatic. Top-tier Lamborghini models come with a reinforced gearbox. Lamborghini uses dual-clutch automated gearboxes.
Frequently asked questions
How much does the power of the Lamborghini Urus 4.0 TFSI 650 hp increase after Stage 1?
Stage 1 chip tuning on the Lamborghini Urus 4.0 TFSI 650 hp boosts engine output by 50 hp: from 650 to 700 hp. Torque rises from 850 to 1000 Nm (+150 Nm).
What changes in the Lamborghini Urus ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Lamborghini Urus with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Does Stage 1 make sense on the Lamborghini Urus 4.0 TFSI 650 hp with this much power?
On the top-spec Lamborghini Urus 4.0 TFSI 650 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Lamborghini Urus 4.0 TFSI 650 hp?
Stage 2 for the Lamborghini Urus 4.0 TFSI 650 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Lamborghini Urus 4.0 TFSI 650 hp use?
The Lamborghini Urus 4.0 TFSI 650 hp is fitted with the Bosch MG1CS008 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
What does remapping the ZF AL552 gearbox give on the Lamborghini Urus 4.0 TFSI 650 hp?
The ZF AL552 TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Lamborghini Urus remain valid after Stage 1?
After remapping the Lamborghini Urus, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Lamborghini Urus?
Reading and writing via OBD takes 25-30 minutes on the Lamborghini Urus. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Lamborghini Urus?
Before Stage 1 the original of the Lamborghini Urus 4.0 TFSI 650 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Lamborghini Urus 4.0 TFSI 650 hp cost?
The remap price for the Lamborghini Urus 4.0 TFSI 650 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.