Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm — Stage 1 file (+4 hp)
hp
Stage 1 file for Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm ECU
Kubota L60 Series ALL ((2013+)) L5460 2.4 55hp (40kW) 183Nm — agricultural diesel engine of the agricultural segment of the Kubota Corporation group (Япония, 1890). Stage 1 chip tuning raises power from 55 to 59 hp (+4 hp, +7%) and torque from 183 to 200 Nm (+17 Nm). A diesel built in 2013 — the Tricore ECU era; OBD flash works on most production revisions.
Kubota is the largest manufacturer of compact tractors in Japan. Kubota engines are used across a wide range of machinery (compact graders, excavators). Kubota is a Japanese manufacturer of agricultural machinery and engines, founded in 1890. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Kubota — компактная техника; Stage 1 безопасный.
Frequently asked questions
How many horsepower does the Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm reach after a remap?
Stage 1 for the Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm adds +4 hp — power increases from 55 to 59 hp (+7%). Torque rises from 183 to 200 Nm (+17 Nm).
What does a Stage 1 remap of the Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm include?
Stage 1 chip tuning of the Kubota L60 Series ALL is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +4 hp with no hardware changes.
What does chip tuning give on the low-output Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm?
Yes, Stage 1 on the low-output Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How much does Stage 2 add on the Kubota L60 Series ALL?
Stage 2 for the Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Kubota L60 Series ALL warranty after chip tuning?
The factory warranty of the Kubota L60 Series ALL does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Kubota L60 Series ALL take?
On the Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Kubota L60 Series ALL?
Yes, the original ECU firmware of the Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Kubota L60 Series ALL?
Stage 1 for the Kubota L60 Series ALL L5460 2.4 55hp (40kW) 183Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.