Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm — Stage 1 file (+17 hp)
hp
Stage 1 file for Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm ECU
Kubota L60 Series ALL ((2013+)) L6060 2.4 63hp (46kW) 196Nm — agricultural diesel engine of the agricultural segment of the Kubota Corporation group (Япония, 1890). Stage 1 chip tuning raises power from 63 to 80 hp (+17 hp, +27%) and torque from 196 to 214 Nm (+18 Nm). The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Kubota engines are used across a wide range of machinery (compact graders, excavators). Kubota is a Japanese manufacturer of agricultural machinery and engines, founded in 1890. Kubota is the largest manufacturer of compact tractors in Japan. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Маломощные агро-дизели — компактная техника; Stage 1 безопасный.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Маломощные Kubota — компактная техника; Stage 1 безопасный.
Frequently asked questions
How much horsepower does Stage 1 add for the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm?
After Stage 1 the power of the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm rises from 63 to 80 hp, a gain of 17 hp (+27%). Torque rises from 196 to 214 Nm (+18 Nm).
How does Stage 1 differ from stock on the Kubota L60 Series ALL?
Stage 1 on the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +17 hp with no hardware changes.
Is Stage 1 safe for the low-output Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm?
Stage 1 on the base Kubota L60 Series ALL is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm?
Stage 2 on the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Kubota L60 Series ALL?
Stage 1 on the Kubota L60 Series ALL voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm done?
The full remap cycle for the Kubota L60 Series ALL — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Kubota L60 Series ALL?
The original Kubota L60 Series ALL ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm?
The cost of Stage 1 for the Kubota L60 Series ALL L6060 2.4 63hp (46kW) 196Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.