Kia Sorento 2.5 CRDI 170 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Kia Sorento 2.5 CRDI 170 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Kia Sorento 2.5 CRDI 170 hp ECU
Kia Sorento (2006) 2.5 CRDI 170 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 170 to 200 hp (+30 hp, +18%) and torque from 392 to 463 Nm (+71 Nm). ECU — Bosch EDC16C39. Flashing method: OBD or Bench depending on the unit's protection. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Kia is a Korean carmaker, part of the Hyundai Motor Group. Kia is positioned alongside Hyundai, with an emphasis on styling and a sporty character. The Stinger is Kia's performance saloon with a turbo V6. DPF/SCR with AdBlue is standard on Euro-6 Hyundai diesels.
Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much does the power of the Kia Sorento 2.5 CRDI 170 hp increase after Stage 1?
After Stage 1 the power of the Kia Sorento 2.5 CRDI 170 hp rises from 170 to 200 hp, a gain of 30 hp (+18%). Torque rises from 392 to 463 Nm (+71 Nm).
How does Stage 1 differ from stock on the Kia Sorento?
Stage 1 is a software optimization of the factory ECU firmware of the Kia Sorento with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Kia Sorento 2.5 CRDI 170 hp?
A remap of the Kia Sorento 2.5 CRDI 170 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Kia Sorento 2.5 CRDI 170 hp?
Stage 2 on the Kia Sorento 2.5 CRDI 170 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Kia Sorento 2.5 CRDI 170 hp use?
The Kia Sorento 2.5 CRDI 170 hp is fitted with the Bosch EDC16C39 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Kia Sorento remain valid after Stage 1?
After remapping the Kia Sorento, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Kia Sorento?
Reading and writing via OBD takes 25-30 minutes on the Kia Sorento. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Kia Sorento?
Before Stage 1 the original of the Kia Sorento 2.5 CRDI 170 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Kia Sorento 2.5 CRDI 170 hp cost?
The remap price for the Kia Sorento 2.5 CRDI 170 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.