John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm — Stage 1 file (+20 hp)
hp
Stage 1 file for John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm ECU
John Deere 6020 Series (I (2001+)) 6020 4.5 75hp (55kW) 330Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 75 to 95 hp (+20 hp, +27%) and torque from 330 to 375 Nm (+45 Nm). The 2001 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The John Deere logo, a leaping deer, is an iconic symbol of the agricultural segment. John Deere is the global leader in chip tuning volume in the agricultural segment. John Deere specialises in tractors, combines and specialist agricultural machinery. Маломощные агро-дизели — компактная техника; Stage 1 безопасный. На старых сельхоз-моделях Stage 1 — OBD без сложностей. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Low-output John Deere models are compact tractors; Stage 1 is safe.
Frequently asked questions
How much does the power of the John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm increase after Stage 1?
After Stage 1 the power of the John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm rises from 75 to 95 hp, a gain of 20 hp (+27%). Torque rises from 330 to 375 Nm (+45 Nm).
How does Stage 1 differ from stock on the John Deere 6020 Series?
Stage 1 is a software optimization of the factory ECU firmware of the John Deere 6020 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base John Deere 6020 Series?
Stage 1 on the base John Deere 6020 Series is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm?
Stage 2 on the John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the John Deere 6020 Series remain valid after Stage 1?
After remapping the John Deere 6020 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the John Deere 6020 Series?
Reading and writing via OBD takes 25-30 minutes on the John Deere 6020 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the John Deere 6020 Series?
Before Stage 1 the original of the John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm cost?
The remap price for the John Deere 6020 Series 6020 4.5 75hp (55kW) 330Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.