John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm
Target +0 hp. Custom development for your engine.
Chip tuning for John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm ECU
John Deere 6020 Series (I (2001+)) 6620 6.8 125hp (92kW) 520Nm — agricultural diesel engine of the agricultural segment of the Deere & Company group (США, 1837). Stage 1 chip tuning raises power from 125 to 155 hp (+30 hp, +24%) and torque from 520 to 620 Nm (+100 Nm). The 2001 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
John Deere is the world's largest agricultural machinery manufacturer, founded in 1837. The John Deere logo, a leaping deer, is an iconic symbol of the agricultural segment. John Deere is the global leader in chip tuning volume in the agricultural segment. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. На старых сельхоз-моделях Stage 1 — OBD без сложностей. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. John Deere среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm?
The Stage 1 gain for the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm is 30 hp (+24%) over the stock 125 hp, for a total of 155 hp. Torque rises from 520 to 620 Nm (+100 Nm).
What is Stage 1 chip tuning for the John Deere 6020 Series?
Stage 1 is a software optimization of the factory ECU firmware of the John Deere 6020 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm?
A remap of the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm?
Stage 2 on the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the John Deere 6020 Series remain valid after Stage 1?
After remapping the John Deere 6020 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the John Deere 6020 Series?
Reading and writing via OBD takes 25-30 minutes on the John Deere 6020 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the John Deere 6020 Series?
Before Stage 1 the original of the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm cost?
The remap price for the John Deere 6020 Series 6620 6.8 125hp (92kW) 520Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.