Jeep Grand Cherokee 3.0 CRD V6 218 hp — Stage 1 file (+57 hp)
hp
Stage 1 file for Jeep Grand Cherokee 3.0 CRD V6 218 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jeep Grand Cherokee 3.0 CRD V6 218 hp ECU
Jeep Grand Cherokee (2005 - WK) 3.0 CRD V6 218 hp — mass-market diesel engine of the passenger segment of the Stellantis group (США, 1941). Stage 1 chip tuning raises power from 218 to 275 hp (+57 hp, +26%) and torque from 510 to 600 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC16+, Bosch EDC16CP31. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Jeep specialises in four-wheel-drive off-roaders and crossovers. Trail Rated is Jeep's signature certification for off-road capability. The Jeep range comprises the Wrangler, Cherokee, Grand Cherokee, Compass, Renegade, Gladiator and Avenger. Jeep diesels are popular in Europe for touring and off-road use. DPF/SCR with AdBlue is standard on Euro-6 Jeep diesels. Jeep uses Stellantis MultiJet diesels and Cummins units on the Wrangler/Gladiator.
The Jeep community in the US offers a large pool of ready-made Stage files for off-road use. In Europe the Jeep community is growing thanks to the diesel versions. High-output Jeep models are the top-spec Grand Cherokee and Wrangler, with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Jeep Grand Cherokee 3.0 CRD V6 218 hp reach after a remap?
The Stage 1 gain for the Jeep Grand Cherokee 3.0 CRD V6 218 hp is 57 hp (+26%) over the stock 218 hp, for a total of 275 hp. Torque rises from 510 to 600 Nm (+90 Nm).
What is Stage 1 chip tuning for the Jeep Grand Cherokee?
Stage 1 on the Jeep Grand Cherokee 3.0 CRD V6 218 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +57 hp with no hardware changes.
What does Stage 1 give on the powerful Jeep Grand Cherokee 3.0 CRD V6 218 hp?
The high-output Jeep Grand Cherokee 3.0 CRD V6 218 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the Jeep Grand Cherokee 3.0 CRD V6 218 hp?
Stage 2 on the Jeep Grand Cherokee 3.0 CRD V6 218 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Jeep Grand Cherokee 3.0 CRD V6 218 hp have?
The Jeep Grand Cherokee 3.0 CRD V6 218 hp has 2 ECU variants: Bosch EDC16+, Bosch EDC16CP31. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Jeep Grand Cherokee?
Stage 1 on the Jeep Grand Cherokee voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Jeep Grand Cherokee 3.0 CRD V6 218 hp done?
The full remap cycle for the Jeep Grand Cherokee — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Jeep Grand Cherokee?
The original Jeep Grand Cherokee ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Jeep Grand Cherokee 3.0 CRD V6 218 hp?
The cost of Stage 1 for the Jeep Grand Cherokee 3.0 CRD V6 218 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.