Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp ECU
Jaguar F-Pace (2021) 5.0 V8 supercharged (SVR) 550 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 550 to 575 hp (+25 hp, +5%) and torque from 700 to 725 Nm (+25 Nm). ECU — Bosch MED17.8.32. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2021 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Jaguar specialises in premium saloons, roadsters and SUVs. SVR (Special Vehicle Operations) is JLR's performance division. Jaguar shares platforms and engines with Land Rover within JLR. The Jaguar V8 Supercharged is an iconic premium-segment engine. The supercharged Jaguar V8 has significant potential with hardware upgrades. Jaguar's petrol range spans turbocharged Ingenium units and supercharged V6/V8 engines.
Modern Jaguars use Tricore protection and often require a Bench read. The supercharged Jaguar V8 comfortably reaches Stage 2 with the right hardware. The Jaguar community is a premium chip tuning niche in the UK and Europe. The top Jaguar SVR engines (supercharged V8) mark the ceiling of British premium performance.
Jaguar uses the ZF 8HP, a premium 8-speed automatic. SVR models use a reinforced ZF 8HP.
Frequently asked questions
What power gain do you get after chip tuning the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp?
After Stage 1 the power of the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp rises from 550 to 575 hp, a gain of 25 hp (+5%). Torque rises from 700 to 725 Nm (+25 Nm).
How does Stage 1 differ from stock on the Jaguar F-Pace?
Stage 1 on the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
What does Stage 1 give on the top-spec Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp?
Stage 1 for the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp?
Stage 2 on the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp run?
The control unit of the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp is the Bosch MED17.8.32. Before flashing, the engineer identifies the exact revision and selects the write method.
Does the ZF 8HPxx transmission need calibration after Stage 1 on the Jaguar F-Pace?
Remapping the ZF 8HPxx gearbox is essential to fully unlock Stage 1 on the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Jaguar F-Pace?
Stage 1 on the Jaguar F-Pace voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp done?
The full remap cycle for the Jaguar F-Pace — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Jaguar F-Pace?
The original Jaguar F-Pace ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp?
The cost of Stage 1 for the Jaguar F-Pace 5.0 V8 supercharged (SVR) 550 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.