Jaguar F-Pace 3.0 V6 supercharged 380 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Jaguar F-Pace 3.0 V6 supercharged 380 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Jaguar F-Pace 3.0 V6 supercharged 380 hp ECU
Jaguar F-Pace (2016) 3.0 V6 supercharged 380 hp — premium petrol engine of the passenger segment of the Tata Motors (Jaguar Land Rover) group (Великобритания, 1922). Stage 1 chip tuning raises power from 380 to 400 hp (+20 hp, +5%) and torque from 460 to 480 Nm (+20 Nm). This engine ships with different ECU variants: Bosch MED17.8.3, Bosch MED17.8.31, Bosch MED17.8.32. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
Jaguar Ingenium is JLR's modern modular engine family. Jaguar is a British premium manufacturer, founded in 1922. Jaguar has been part of Tata Motors via Jaguar Land Rover (JLR) since 2008. The supercharged Jaguar V8 has significant potential with hardware upgrades. Jaguar shares some ECUs with Ford (a Visteon legacy). The Jaguar V8 Supercharged is an iconic premium-segment engine.
The supercharged Jaguar V8 comfortably reaches Stage 2 with the right hardware. The Jaguar community is a premium chip tuning niche in the UK and Europe. The top Jaguar SVR engines (supercharged V8) mark the ceiling of British premium performance.
SVR models use a reinforced ZF 8HP. Jaguar uses the ZF 8HP, a premium 8-speed automatic.
Frequently asked questions
What is the Stage 1 effect on the Jaguar F-Pace 3.0 V6 supercharged 380 hp?
Stage 1 for the Jaguar F-Pace 3.0 V6 supercharged 380 hp adds +20 hp — power increases from 380 to 400 hp (+5%). Torque rises from 460 to 480 Nm (+20 Nm).
What does a Stage 1 remap of the Jaguar F-Pace 3.0 V6 supercharged 380 hp include?
Stage 1 on the Jaguar F-Pace 3.0 V6 supercharged 380 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
What does Stage 1 give on the top-spec Jaguar F-Pace 3.0 V6 supercharged 380 hp?
On the top-spec Jaguar F-Pace 3.0 V6 supercharged 380 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Jaguar F-Pace 3.0 V6 supercharged 380 hp?
Stage 2 for the Jaguar F-Pace 3.0 V6 supercharged 380 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Jaguar F-Pace 3.0 V6 supercharged 380 hp have?
The Jaguar F-Pace 3.0 V6 supercharged 380 hp has 3 ECU variants: Bosch MED17.8.3, Bosch MED17.8.31, Bosch MED17.8.32. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does the ZF 8HPxx transmission need calibration after Stage 1 on the Jaguar F-Pace?
Remapping the ZF 8HPxx gearbox is essential to fully unlock Stage 1 on the Jaguar F-Pace 3.0 V6 supercharged 380 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Jaguar F-Pace?
Stage 1 on the Jaguar F-Pace voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Jaguar F-Pace 3.0 V6 supercharged 380 hp done?
The full remap cycle for the Jaguar F-Pace — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Jaguar F-Pace?
The original Jaguar F-Pace ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Jaguar F-Pace 3.0 V6 supercharged 380 hp?
The cost of Stage 1 for the Jaguar F-Pace 3.0 V6 supercharged 380 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.