Iveco Trakker T27 273hp (201kW) 950Nm — Stage 1 file (+40 hp)
hp
Stage 1 file for Iveco Trakker T27 273hp (201kW) 950Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco Trakker T27 273hp (201kW) 950Nm ECU
Iveco Trakker (I) T27 273hp (201kW) 950Nm — commercial diesel engine of the commercial segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 273 to 313 hp (+40 hp, +15%) and torque from 950 to 1090 Nm (+140 Nm).
Iveco is an Italian manufacturer of trucks and commercial vehicles, founded in 1975. Iveco is part of the Iveco Group (spun off from CNH Industrial in 2022). The Iveco Daily is a high-volume commercial van in Europe. Truck diesels carry an extended set of maps for commercial load, with the focus on torque. The Cursor 8/9/11 are for heavy trucks and special machinery. The Iveco Daily is a mainstay of Europe's camper and delivery industry.
On high-output trucks, Stage 1 reduces fuel consumption under load. The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. High-output MAN units are long-haul tractors with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Iveco Trakker T27 273hp (201kW) 950Nm?
After Stage 1 the power of the Iveco Trakker T27 273hp (201kW) 950Nm rises from 273 to 313 hp, a gain of 40 hp (+15%). Torque rises from 950 to 1090 Nm (+140 Nm).
How does Stage 1 differ from stock on the Iveco Trakker?
Stage 1 is a software optimization of the factory ECU firmware of the Iveco Trakker with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Iveco Trakker?
The high-output Iveco Trakker T27 273hp (201kW) 950Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Iveco Trakker T27 273hp (201kW) 950Nm?
Stage 2 on the Iveco Trakker T27 273hp (201kW) 950Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Iveco Trakker remain valid after Stage 1?
After remapping the Iveco Trakker, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Iveco Trakker?
Reading and writing via OBD takes 25-30 minutes on the Iveco Trakker. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Iveco Trakker?
Before Stage 1 the original of the Iveco Trakker T27 273hp (201kW) 950Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Iveco Trakker T27 273hp (201kW) 950Nm cost?
The remap price for the Iveco Trakker T27 273hp (201kW) 950Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.