Iveco Trakker T48 480hp (353kW) 2200Nm — Stage 1 file (+60 hp)
hp
Stage 1 file for Iveco Trakker T48 480hp (353kW) 2200Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco Trakker T48 480hp (353kW) 2200Nm ECU
Iveco Trakker (I) T48 480hp (353kW) 2200Nm — commercial diesel engine of the commercial segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 480 to 540 hp (+60 hp, +12%) and torque from 2200 to 2520 Nm (+320 Nm).
Cursor is the range of Iveco/CNH commercial diesel engines. Iveco shares some engines with Case and New Holland within CNH/FPT. Iveco is an Italian manufacturer of trucks and commercial vehicles, founded in 1975. Truck chip tuning is a discipline of its own, focused on fuel consumption and pulling power rather than peak output. DPF/SCR with AdBlue is standard on modern Euro-6 truck engines. Truck diesels carry an extended set of maps for commercial load, with the focus on torque.
The professional logistics segment tunes for fuel consumption and pulling characteristics. The truck chip tuning community is an industry of its own, focused on long-haul routes. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
How much does the power of the Iveco Trakker T48 480hp (353kW) 2200Nm increase after Stage 1?
The Stage 1 gain for the Iveco Trakker T48 480hp (353kW) 2200Nm is 60 hp (+12%) over the stock 480 hp, for a total of 540 hp. Torque rises from 2200 to 2520 Nm (+320 Nm).
What is Stage 1 chip tuning for the Iveco Trakker?
Stage 1 chip tuning of the Iveco Trakker is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +60 hp with no hardware changes.
What is the Stage 1 potential of the Iveco Trakker T48 480hp (353kW) 2200Nm?
Stage 1 for the Iveco Trakker T48 480hp (353kW) 2200Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Iveco Trakker?
Stage 2 on the Iveco Trakker T48 480hp (353kW) 2200Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Iveco Trakker warranty after chip tuning?
The factory warranty of the Iveco Trakker does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Iveco Trakker take?
On the Iveco Trakker T48 480hp (353kW) 2200Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Iveco Trakker?
Yes, the original ECU firmware of the Iveco Trakker T48 480hp (353kW) 2200Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Iveco Trakker?
Stage 1 for the Iveco Trakker T48 480hp (353kW) 2200Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.