Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm — Stage 1 file (+70 hp)
hp
Stage 1 file for Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm ECU
Iveco Trakker (I) Cursor13 - 450 12.9 450hp (331kW) 2200Nm — commercial diesel engine of the commercial segment of the Iveco Group / CNH Industrial group (Италия, 1975). Stage 1 chip tuning raises power from 450 to 520 hp (+70 hp, +16%) and torque from 2200 to 2580 Nm (+380 Nm).
Iveco is part of the Iveco Group (spun off from CNH Industrial in 2022). The Iveco Daily is a high-volume commercial van in Europe. The Iveco Stralis and S-Way are long-haul tractor units. The Cursor 8/9/11 are for heavy trucks and special machinery. The Iveco Daily is a mainstay of Europe's camper and delivery industry. Mid-generation truck models use standard OBD read/write.
The truck chip tuning community is an industry of its own, focused on long-haul routes. The professional logistics segment tunes for fuel consumption and pulling characteristics. Top MAN units sit at the power ceiling of the European truck segment.
Frequently asked questions
What is the Stage 1 effect on the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm?
Stage 1 for the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm adds +70 hp — power increases from 450 to 520 hp (+16%). Torque rises from 2200 to 2580 Nm (+380 Nm).
What does a Stage 1 remap of the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm include?
Stage 1 chip tuning of the Iveco Trakker is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +70 hp with no hardware changes.
What is the Stage 1 potential of the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm?
On the top-spec Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How much does Stage 2 add on the Iveco Trakker?
Stage 2 for the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Iveco Trakker warranty after chip tuning?
The factory warranty of the Iveco Trakker does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Iveco Trakker take?
On the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Iveco Trakker?
Yes, the original ECU firmware of the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Iveco Trakker?
Stage 1 for the Iveco Trakker Cursor13 - 450 12.9 450hp (331kW) 2200Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.