Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp ECU
Isuzu D-Max / Vcross (2019 - RG) 3.0d (4JJ3) 190 hp — commercial diesel engine of the passenger segment of the Isuzu Motors group (Япония, 1916). Stage 1 chip tuning raises power from 190 to 210 hp (+20 hp, +11%) and torque from 450 to 510 Nm (+60 Nm). This engine ships with different ECU variants: Transtron Aurix TC265D, Transtron Aurix TC277T. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern diesel built in 2019 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
Isuzu is a Japanese maker of trucks, pickups and diesel engines, founded in 1916. The Isuzu Forward and Giga are long-haul trucks. The Isuzu D-MAX is a mainstream pickup in Asia and Africa. Mid-range diesels are a mainstream chip tuning subject in the commercial segment. On modern trucks, Bench is often needed for Tricore TPROT. Truck diesels carry an extended set of maps for commercial load, with the focus on torque.
The professional logistics segment tunes for fuel consumption and pulling characteristics. Protection on modern trucks is Tricore, often requiring Bench. Stage 1 on truck diesels focuses on torque for loaded running. Mid-range MAN trucks are a mainstream chip tuning subject in logistics.
Frequently asked questions
How much horsepower does Stage 1 add for the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp?
After Stage 1 the power of the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp rises from 190 to 210 hp, a gain of 20 hp (+11%). Torque rises from 450 to 510 Nm (+60 Nm).
How does Stage 1 differ from stock on the Isuzu D-Max / Vcross?
Stage 1 is a software optimization of the factory ECU firmware of the Isuzu D-Max / Vcross with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp?
A remap of the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp?
Stage 2 on the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp built with?
The Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp comes with 2 ECU variants: Transtron Aurix TC265D, Transtron Aurix TC277T. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Isuzu D-Max / Vcross remain valid after Stage 1?
After remapping the Isuzu D-Max / Vcross, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Isuzu D-Max / Vcross?
Reading and writing via OBD takes 25-30 minutes on the Isuzu D-Max / Vcross. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Isuzu D-Max / Vcross?
Before Stage 1 the original of the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp cost?
The remap price for the Isuzu D-Max / Vcross 3.0d (4JJ3) 190 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.