Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp ECU
Hyundai Starex - H-1 - H200 - i800 (2018) 2.5 CRDI EU6 175 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 175 to 200 hp (+25 hp, +14%) and torque from 441 to 500 Nm (+59 Nm). This engine ships with different ECU variants: Bosch DCU17PC42, Denso MB275700. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern diesel built in 2018 — a generation with encrypted firmware (Tricore TPROT) that often requires a Bench read.
IONIQ is Hyundai's standalone electric brand (IONIQ 5, 6, 7). On modern Hyundai diesels, Bench is often needed for the top models.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. Protection on modern Hyundai N models is tough and requires Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much does the power of the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp increase after Stage 1?
After Stage 1 the power of the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp rises from 175 to 200 hp, a gain of 25 hp (+14%). Torque rises from 441 to 500 Nm (+59 Nm).
How does Stage 1 differ from stock on the Hyundai Starex - H-1 - H200 - i800?
Stage 1 chip tuning of the Hyundai Starex - H-1 - H200 - i800 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp?
Yes, Stage 1 for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Hyundai Starex - H-1 - H200 - i800?
Stage 2 on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp?
The Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp was fitted with different ECUs depending on the year and trim: Bosch DCU17PC42, Denso MB275700. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Hyundai Starex - H-1 - H200 - i800 warranty after chip tuning?
The factory warranty of the Hyundai Starex - H-1 - H200 - i800 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Hyundai Starex - H-1 - H200 - i800 take?
On the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Hyundai Starex - H-1 - H200 - i800?
Yes, the original ECU firmware of the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Hyundai Starex - H-1 - H200 - i800?
Stage 1 for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI EU6 175 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.